How to set the program on the Enercal controller

1. Press the Menu button.
2. Enter passcode 1000, then press OK
3. Use the +/- buttons to navigate to SET/CHANGE PROGRAM, then press OK
4. The screen will show MONDAY (flashing)
5. Press the OK button to begin editing. 
6. Set Start Time (HH:MM, 24-hour format) using +/-.
7. Press OK to move to End Time and adjust as needed.
8. Press OK again to move to the next day.
   • To skip a day, press OK when the day is flashing without changing times
9. Use +/- to switch between days. 
10. Once finished, press ESC twice to return to the home screen and save settings. 

If you are experiencing any issues or a problem remains, please contact our Technical Help Team on 0121 506 7700 option 3  or email us at [email protected],