How to set the temperature on the Enercal Controller

1. Press the Menu button on the Enercal Controller.
2. Enter passcode 1000, the press the OK button.
3. Use the +/- buttons to navigate.
4. Select SET/CHANGE TEMPERATURE,then press OK.
5. The screen will display DAY SETTINGS (flashing).
6. Press the OK button again -  the temperature numbers will begin flashing.
7. Use the +/- buttons to adjust the temperature.
8. Press OK to move to the next digit.
9. After  setting the desired day temperature, press OK to move to NIGHT SETTINGS.
10. Repeat steps 6-8 to set night temperature.

Night temperature is used only then the heater must maintain a temperature ouside of programmed times.

     11.Once both temperatures are set, press the ESC button to save and return to the main menu.

If you are experiencing any issues or a problem remains, please contact our Technical Help Team on 0121 506 7700 option 3  or email us at [email protected],